Hello Tello Pilot!
Join our DJI Tello community & remove this banner.
Sign up

Tello crash

Bajkerpeto

New member
Joined
Aug 29, 2022
Messages
1
Reaction score
0
I was flying the drone in the wind, it hit a bush, the propeller flew off, which I couldn't find, and I replaced it with a new one, when I tried to take off, all four propellers were spinning just because one side didn't come off the ground
 

Hacky

Well-known member
Joined
Jul 19, 2021
Messages
255
Reaction score
105
Location
Germany
Sounds like the new propellers were not placed correctly. There are different types (CW, CCW for clockwise and counter-clockwise rotation).

It should be iterating: CW on front-left, CCW on front-right, CW on rear-right and CCW on rear-left.

If you are in doubt, please post a photo.
 

Tdsdad2020

New member
Joined
Nov 10, 2020
Messages
2
Reaction score
0
I was flying the drone in the wind, it hit a bush, the propeller flew off, which I couldn't find, and I replaced it with a new one, when I tried to take off, all four propellers were spinning just because one side didn't come off the ground
You used the wrong propeller. Check the markings on the propeller and make sure it is the correct one.. They don't all fit in the same position
 

New Threads

Members online

No members online now.

Forum statistics

Threads
5,443
Messages
38,856
Members
15,444
Latest member
dikmie2