a gadget that lets tello take a vertical view photo

[wb34]

Because the Tello Tello drone camera is fixed, it is impossible to take pictures of vertical angles, and there is a very important perspective in the picture. I refer to some modified solutions, using 3d technology to print some accessories plus mirrors, you can make a vertical picture. After testing, it may be due to the design angle problem, there will probably be 10% loss of picture in the camera mode, the video will be complete, but the anti-shake is not stable, guessing is related to the camera's electronic anti-shake technology.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Flydrone]

If it is interesting, on this site there is a lot of material for 3D printing also for TELLO

"tello drone" 3D Models to Print - yeggi

 

[volate!lo]

The devil seems to be in the detail, that is the mirror used. This top-down picture is the best one I have seen from a Tell, most are just blurry.

 

[Ansia]

High quality mirror. Not just some plasticky piece on a frame.

 

[volate!lo]

I have seen very lousy image quality from normal glass mirrors so there must be more to this. Maybe use a very thin glass?

 

[4x4]

What a great idear the gadget does a really nice job.

 

[wb34]

I have seen very lousy image quality from normal glass mirrors so there must be more to this. Maybe use a very thin glass?

I know that some people use soft mirrors made of pc , which are purchased from Amazon. Although it is easy to cut with scissors, it will cause distortion of the image.
so I used a mirrors made of acrylic material. The thickness of the lens was 1mm, but unfortunately, it was difficult for him to cut. I had to ask the manufacturer to help me cut it and then mail it to me.

 

[doug01n]

Image is great! Can you please share the .stl?

 

[wb34]

Image is great! Can you please share the .stl?

Tello Mirror Mount by keizi666

It is a mount for taking the picture just under Tello.Use a mirror of 17 mm square.I refined what I made on paper on May 8, 2018.https://photos.app.goo.gl/eeST98dyfPNqscjh8I refer to the design of Jamie-Clay.https://www.thingiverse.com/thing:2911427I also develop TALS(Tello Altitude Limit...

www.thingiverse.com