Do you have have any ideas that I can use to attach the raspberry pi to the drone? I want to attach it with the case because I’m worry the raspberry pi is very fragile.
Tello Drone and Raspberry Pi 4
- Thread starter ModernNoob
- Start date
Do you have have any ideas that I can use to attach the raspberry pi to the drone? I want to attach it with the case because I’m worry the raspberry pi is very fragile.
quaddamage
Well-known member
- Joined
- Sep 5, 2019
- Messages
- 71
- Reaction score
- 20
Don't.
Buy Raspberry Pi Zero or equivalent, attach that.
Also, first figure out electrical connection, then physical placement (well, you only really have one option for the placement, but I'm sure you'll figure it out).
EDIT:
Ok, looking at that, it seem there is more than one option, or rather there is only one place but you can select orientation:
Onboard Raspberry Pi
I packed a Raspberry Pi Zero W on top of Tello. What can you do with the Raspi? Use a camera to record Full-HD video and store it on the Micro SD card, getting rid of distortions caused by the WLAN transmission (check if this is legal in your country) Use a sensor like a distance sensor...
tellopilots.com
There are SO many things wrong with that sentence, it's kind of impressive.
Mike Shock
Well-known member
I made such a marriage of Tello EDU and Raspberry Pi Zero W: a Ruby program sent commands from RPiZW to Tello and the drone did autonomous flight.Don't.
Buy Raspberry Pi Zero or equivalent, attach that.
Also, first figure out electrical connection, then physical placement (well, you only really have one option for the placement, but I'm sure you'll figure it out).
EDIT:
Ok, looking at that, it seem there is more than one option, or rather there is only one place but you can select orientation:
Onboard Raspberry Pi
I packed a Raspberry Pi Zero W on top of Tello. What can you do with the Raspi? Use a camera to record Full-HD video and store it on the Micro SD card, getting rid of distortions caused by the WLAN transmission (check if this is legal in your country) Use a sensor like a distance sensor...
There are SO many things wrong with that sentence, it's kind of impressive.
We are working on similar ideas. We have found a nice *.stl file on thing verse to 3D print a mount for the pi zero. We will try to print it this weekend. Also the Roblin ZUMI come as a Robot and uses a Raspberry Pi. .it has a automobile shell that can be removed. and then consists of a Pi zero W, with a board with lights, iiC display, and pi camera. It doe AI, recognition, reads QR codes, etc with software installed, d connects to an android tablet. It can be mounted on a Tello Talent with the camera place where you want it. The kit sells for about $200. We are redoing the board is decrease the weight. So far, it looks good, and everything seems to work in this manner. I hope this gives you some ideas.
A good turn key system that can be used with the Tello is to strip the Robolink Zumi components ( Raspberry Pi Zero W, raspberry camera, IIC display, and Robolink ZUMI dev board ) add it to the Tello as both top and bottom mounts. Use their software with Python to run it. You can lighten the load by cutting off IR sensors and LED's, etc. You can 3D print mounts, etc. I interested contact me. for details.
Similar threads
