Illuminated top case and downward facing lighting, final configuration.

[DRN1]

 

[Pursuer]

That looks real good. Could you let up know what led lights you are using? Thanks...

 

[Ansia]

My question is. Do the sensors work with these lights?

 

[DRN1]

My question is. Do the sensors work with these lights?

The Tello will position hold up to 1 to 1.25 meters. After that it drifts. There is some video posted on a number of FB Tello groups.

 

[DRN1]

That looks real good. Could you let up know what led lights you are using? Thanks...

Off eBay and power drawn off Tello via micro USB port. I used the OTG micro Male to female usb shown below

 

[DRN1]

My question is. Do the sensors work with these lights?

Yes. Tello will position hold up to 1 to 1.25 meters.

 

[ph2t]

Great work DRN, especially taking power from the USB port!

In regards to the working position hold figure of 1-1.25m - is this when the tello is flying in pitch black conditions?

Cheers,
ph2t.

 

[Tello Fello]

Hi, where do you buy the clear cover?. Thanks

 

[DRN1]

Great work DRN, especially taking power from the USB port!

In regards to the working position hold figure of 1-1.25m - is this when the tello is flying in pitch black conditions?

Cheers,
ph2t.

Yes

 

[DRN1]

Hi, where do you buy the clear cover?. Thanks

eBay and Amazon

 

[JBTello]

That's incredible!!
What sort of impact did drawing the power for the LEDs have on flight time?

 

[Tello Fello]

View attachment 2115View attachment 2115View attachment 2117View attachment 2115

That's really cool!!

 

[DRN1]

That's incredible!!
What sort of impact did drawing the power for the LEDs have on flight time?

I got 10 minutes flight in an indoor hover test, I would say on average about one minute reduction in flight time.

 

[xcrost]

Awesome! I had a couple of lighting prototypes but I like yours much better! Can you leave them plugged in when you change batteries? (hot plug it) Where did you get the led lights? 4-5v?? Thanks!

 

[DRN1]

Awesome! I had a couple of lighting prototypes but I like yours much better! Can you leave them plugged in when you change batteries? (hot plug it) Where did you get the led lights? 4-5v?? Thanks!

I got led off eBay. See photo in this trail. They are designed to plug into usb socket.

Yes you can leave plug in whilst swapping batteries. Lights only illuminate after the Tello boots up when it is switched on.

 

[brick72]

Wow... !!!!
Can you Please do a "how to" and a buying list????
This is the most coolest thing I have seen with Tello.

 

[DRN1]

Wow... !!!!
Can you Please do a "how to" and a buying list????
This is the most coolest thing I have seen with Tello.

Please see photos in this thread above, all that is needed is the usb leds and an OTG Male micro usb to female usb and a clear Tello top cover.

The LEDs are simply daisy chained off the the micro usb and the top cover led is connected to the first LED. You can see in the pictures I attach how the underside of the top cover was modified to allow the LED to fit flush under the cover.

Cost was £3.50 for top cover £1.99 for the five LED units and £1.99 for the two OTG connectors.

 

[brick72]

Looks realy impressive.
I'm not that Handy as you, even with those Pictures I cant rebuild it. Too bad.
Is it funny to fly with Light in the Dark?

 

[umanbean]

Please see photos in this thread above, all that is needed is the usb leds and an OTG Male micro usb to female usb and a clear Tello top cover.

@DRN1 Just wanted to say Thanks for coming up with this idea, and the how-to, pictures and parts list.

My clear cover got here today, other parts on the way. Cheap easy project - cool result!