New app: TelloFPV for Android
- Thread starter volate!lo
- Start date
raulvolador
Well-known member
On connection lost recording should automatically stop.
On app exit the recording may have been stopped the hard way in recent releases, depending on individual phone timing. That will be fixed in the next release
As to stop photo download... As mentioned the problem is the user interface. I don't want to introduce a button to cancel a download, and I don't like these "Cancellable" messages like Ryze Tello app has for cancelling the auto landing. That would not work anyway for VR mdoe.
I will instead cancel photo download on "Stop" button. Since its a bit of a hidden function I'll add a photo download message that gives a hint to use "Stop" to cancel photo download. That allows it to use this function for both VR and normal FPV mode the same way.
On app exit the recording may have been stopped the hard way in recent releases, depending on individual phone timing. That will be fixed in the next release
As to stop photo download... As mentioned the problem is the user interface. I don't want to introduce a button to cancel a download, and I don't like these "Cancellable" messages like Ryze Tello app has for cancelling the auto landing. That would not work anyway for VR mdoe.
I will instead cancel photo download on "Stop" button. Since its a bit of a hidden function I'll add a photo download message that gives a hint to use "Stop" to cancel photo download. That allows it to use this function for both VR and normal FPV mode the same way.
My gamesir ts1 will not connect via BT? I have the controller paired up and paired with my phone and powered on but when I try to select the controller from within the app I only get an "Onscreen" option. I have tried to connect different ways (eg power app on 1st. ect) but no luck. My phone does not have that otg cable capability so that's not an option. I can connect the contoller via BT to the atellopilot app but I would like to use this TelloFTP. any suggestions would be greatly appreciated.
MrSpok
Well-known member
- Joined
- Dec 30, 2018
- Messages
- 143
- Reaction score
- 58
Was similar by me.
Have you the latest update installed?
Then try to delete the connection and pair new. If this doesn't work, reboot your cell.
Good luck!
raulvolador
Well-known member
Thanks for the quick replies! I do have the latest app release, rebooted my android cricket, unpaired the t1s, started the app but still no connection (?). when the app was opened it did request that the si to be paired. I then paired it and re-opened the app but I still only get the "onscreen" option (no gamesir t1s indicated) What am I doing wrong?
This gives a few hints for the T1s:
Tutorial | How to connect GameSir T1s to your Android Phone/ Tablet/ TV BOX, Wind
MrSpok
Well-known member
- Joined
- Dec 30, 2018
- Messages
- 143
- Reaction score
- 58
According to the manual you have to press the "Home" button (the button for switch on/off at the top) and the "A" button at the same time. So switch off the controller, press "A" first and keep it pressed, then "home". This is for Android. You can also use the "X" button instead of "A". That also works by me.
In your list of BT devices should appear yout controller. Tap on it and your controller will vibrate a short time. Then it is connected.
Then in the app the control frames shoud disappear (depends on the settings).
If it does not work, install the "Gamepad Tester" and look, if the commands of the controller arrive on the phone.
ceredajunior
New member
@Garry and Samsung owners:
Remember that who owns a Samsung (with Game Launcher installed) can record directly with the internal functions of this app, including your face on the left side in video (if necessary) and sound!
Remember that who owns a Samsung (with Game Launcher installed) can record directly with the internal functions of this app, including your face on the left side in video (if necessary) and sound!
I had this same problem, make sure your font size is not to big so you can see the whole controller option window in the app then you will see "scan for new controllers"also it won't come up as "t1s" it will be something else...
Hi, having trouble re mapping my on screen buttons after new update. Am I missing something /doing it wrong?
ceredajunior
I don't own a Samsung phone.
But thanks for the info anyway.
I don't own a Samsung phone.
But thanks for the info anyway.
Volate!llo, I just installed 1.06 version and it works perfectly with using Flysky FS-i6S and USB dongle thru training port. The FS-i6S also has micro USB port, I tried connect directly using OTG cable and it also works except the output to each channel is limited to 80%. Look at the graph on tune control page and the signal doesn’t go all the way. Would it be possible to boost the signal to each channel?
Similar threads
