Tello spare parts

[gwiazd0r]

Anybody know an on-line Tello spare parts supplier ? (nothing on ebay but replacement motors only)
I have crashed my Tello and needed to change the motors but unfortunately in the process I have ripped the connecting ribbon/cable between the camera and controller.
It fly but I have no video ,so need to but a new connector for full experience

 

[xcrost]

Anybody know an on-line Tello spare parts supplier ? (nothing on ebay but replacement motors only)
I have crashed my Tello and needed to change the motors but unfortunately in the process I have ripped the connecting ribbon/cable between the camera and controller.
It fly but I have no video ,so need to but a new connector for full experience

DItto. I need the ribbon cable also. I haven't had a chance to look around yet. Pls let me know if you find one! Thanks! I have one off another drone I will will try. I might get lucky.

 

[Hehenderson410]

Any luck with this? I need one too.....how’d you get it to fly? Mine just says camera sensor error and won’t go any **** where

 

[xcrost]

Any luck with this? I need one too.....how’d you get it to fly? Mine just says camera sensor error and won’t go any **** where

You can use Tello EDU app or Tello FPV

 

[xcrost]

Either of those work better than stock app anyway lol
Tello FPV is BEST!

 

[Ansia]

Why make 3 threads of the same thing?

 

[dalefhome]

Anyone interested working with a super light frame have a look at this.
3D printed on Ender3

 

[Flydrone]

Any luck with this? I need one too.....how’d you get it to fly? Mine just says camera sensor error and won’t go any **** where

out of curiosity, try removing the bottom cover (4 screws) and gently press the camera connector.
I don't think it matters, but try an IMU calibration.

 

[miky]

Me interesa este hilo. A la espera de una solución.

 

[dalefhome]

Me interesa este hilo. A la espera de una solución.

Thanks for the interest in my super light Tello frame.

Looks like The stl files can’t be added. E-mail me and I will send all to you.

[email protected]

 

[bigred143]

I'm looking for the part of the Tello that houses the battery, mostly the onboard connector for the battery. Have an idea to piggyback a second battery for more range, but need the connector so that I can remove both batteries to charge them.

 

[Flydrone]

I'm looking for the part of the Tello that houses the battery, mostly the onboard connector for the battery. Have an idea to piggyback a second battery for more range, but need the connector so that I can remove both batteries to charge them.

I don't think it's a good idea to make this change ... it would add over 26 g of weight to the TELLO and even if there was a second battery on board, with this extra weight two batteries would last as long as one! then how would you connect the second battery? To have a voltage of 4.35 V and increase the capacity of 2,200 mAh you have to put the two batteries in parallel, but I think it is a fairly complicated job to do on the little Tello.

Tip: take some extra batteries and have fun with your TELLO.

 

[dalefhome]

I'm looking for the part of the Tello that houses the battery, mostly the onboard connector for the battery. Have an idea to piggyback a second battery for more range, but need the connector so that I can remove both batteries to charge them.

I am working on a frame (10g) that will hold 2 stock (OEM Lihv) batteries. The batteries will be in parallel to get 2200mah at 4.3V. I have disassembled some stock (OEM) batteries to get the connecter then attach it to a 1400mah Lihv (4.3V) cell. Flight time is 14 minutes. The new frame will be about 12g more than stock tello reedy to fly. I have not found anywhere that supply’s tello ports.

 

[dalefhome]

I don't think it's a good idea to make this change ... it would add over 26 g of weight to the TELLO and even if there was a second battery on board, with this extra weight two batteries would last as long as one! then how would you connect the second battery? To have a voltage of 4.35 V and increase the capacity of 2,200 mAh you have to put the two batteries in parallel, but I think it is a fairly complicated job to do on the little Tello.

Tip: take some extra batteries and have fun with your TELLO.

I am working on a frame (10g) that will hold 2 stock (OEM Lihv) batteries. The batteries will be in parallel to get 2200mah at 4.3V. I have disassembled some stock (OEM) batteries to get the connecter then attach it to a 1400mah Lihv (4.3V) cell. Flight time is 14 minutes. The new frame will be about 12g more than stock tello reedy to fly. I have not found anywhere that supply’s tello ports.

 

[Flydrone]

I did not mean that I am not interested in this type of modification ... yours is a project from scratch, but I see it more complicated on the original tello frame ..

 

[dalefhome]

I did not mean that I am not interested in this type of modification ... yours is a project from scratch, but I see it more complicated on the original tello frame ..

I find it much essayer to design a new frame. Once you have a design you can make modifications and print it again. I would not try to mod the stock frame. The pic attached shows what my frame is looking like. Have more work to do. You can see the 2 stock batteries and wiring connection. When I get it right I will print a frame with the battery conations.

 

[bigred143]

I did not mean that I am not interested in this type of modification ... yours is a project from scratch, but I see it more complicated on the original tello frame ..

No worries. I understand your meaning.

 

[bigred143]

I find it much essayer to design a new frame. Once you have a design you can make modifications and print it again. I would not try to mod the stock frame. The pic attached shows what my frame is looking like. Have more work to do. You can see the 2 stock batteries and wiring connection. When I get it right I will print a frame with the battery conations.

Now that looks interesting... Any more pics of other angles of this so far?