Tello Talent - DJI Robomaster TT - DJI Robomaster Extension kit

[Dan]

We will provide information and videos on the Tello Talent - DJI Robomaster TT - DJI Robomaster Extension kit. as we get an experience level with them.. Our first video "Tello Talent for Christmas and 3D printed parts. It is on Youtube channel MECATX.. Most Sundays, we produce a new video. Between now and Christmas they will detailing these devices. This Sunday, at 2L15 CDT USA, we will be doing and unboxing of the kit. We will try a ZOOM meeting for a small number of live participants I will post the information on Tellopilots Friday and Saturday posts, of the meeting ID and Password as this is a meeting and not a webinar.

 

[Dan]

The ZOOM meeting to unbox the Tello Talent of now DJI Robomaster Tello Talent will be Sunday, Dec. 6 at 2:15 PM CDT USA. The ZOOM ID is 318 188 5317, password is 12345. This will be the first in a series to cover this product as we gain experience with it. We will focus on the Talent uses ( STEAM/ARTS ) uses. JOIN US to participate. Watch on youtube to view only.

 

[Dan]

A ZOOM meeting to unbox the Tello Talent or now DJI Robomaster Tello Talent will be SUNDAY DEC. 6 at 2:15 PM CDT USA. The ZOOM ID is 318 188 5317, password is 12345. This will be the first in a series to cover this product as we gain experience with it. We will focus on the Talent uses ( STEAM/ARTS ) uses. As this new Tello adds a large new dimension to it's uses in education and programming. We need a community involved as all the instructions as in Chinese ( NO ENGLISH ( as it will not be sold in the USA for awhile. Join our website at www.mecatx.ning.com to follow our learning curve on this complicated drone JOIN US to participate., we plan to do a meeting or webinar, the first Sunday of each month. Watch on Youtube to view only.

 

[Dan]

Just received a few Robomaster TT Tello Talent drones. So far have practiced with the LED, and dot matrix LED using the Tello EDU. We previously posted a video on the Expansion kit,, but lacked the manual in English. Th3 manual is now available in English. The Tello EDU app is simple to use, and very loaded with programing blocks. Here is the first video we ahve made on this new drone. We will work more on other features such as QR code and object recognition, drone formation flying and Arduino programming this summer., The manual talks about the the DJI flight maps, but has little to no information on them. It gives a website address to download the images, but their are non available. to download. You can contact me at [email protected], or follow us on youtube channel MECATX.

 

[Dan]

For those interested in Robomaster Extension kit and the Robomaster TT open source controller. We ahve downloaded and with google translate have translated the Chinese version to English. This is the first half of the full document. This part covers the codi9ng for the LED and Matrix display fairly easy to understand if you put them side by side on a split screen or two monitors. There is a considerable amount of coding provided in the figures. This is fairly complicated coding compare with block coding. We will continue to publish our videos and info on our progress. We have found 1. that the Tello EDU must be activated with the Tello app. 2. it will have a Tello name Tello XXXX in the WiFI, Then attach the open source controller, put the switch in down position. The WiFi now will show a RMTT name. Connect and update if it states an update is needed. you can test the open source controller with the USB port and a USB energy bank. it is good to be able to red the voltage of a battery before inserting to make sure it has enough power ( volts and amp's ) As of this time we are using the Tello EDU app for this testing. We still have many of it's functions to test such as QR, object reading, and swarm flying. I hope this helps some. We have few following this thread, so for those that are, please reply as we need help with this Arduino venture.