Hello Tello Pilot!
Join our DJI Tello community & remove this banner.
Sign up

faulty tello

Jammo

Member
Joined
Sep 15, 2019
Messages
5
Reaction score
2
Hi all, my little Tello has developed a fault and I'm hoping somewhere will have some ideas please...

Had a little crash into a rose bush and lost a prop this afternoon. Replaced the prop and reset the imu calibration just in case but when I try and take off now it wont lift and crashes to the front left hand corner. the prop which struck the rose bush.

Also says visualisation stability not working.

any ideas, home fix, terminal or send it off
 
Mine doesnt have marks?
 

Attachments

  • 15685709429431613906933012042050.jpg
    15685709429431613906933012042050.jpg
    1.3 MB · Views: 9
  • 15685709884834999489376671944635.jpg
    15685709884834999489376671944635.jpg
    1 MB · Views: 9
Check the actual propellers
51148xQCfCL._AC_SY400_.jpg
 
NP. Glad to hear it's up and running.

VPS warnings can be a myriad of things depending on the environment (e.g. low light) or terrain (e.g. uniform surface).

When does it occur for you?

At the minimum, clean the IR emitter/receiver with a soft material and the tiny pinhole camera (could be small lodged particle).
 
  • Like
Reactions: BluRey11 and Jammo
It happened again just now and instantly flew off on its own. I'll try the clean and see how that works. Thank you
 

New Posts

Members online

No members online now.

Forum statistics

Threads
5,690
Messages
39,934
Members
17,023
Latest member
Repiv

New Posts