- Joined
- Dec 11, 2018
- Messages
- 44
- Reaction score
- 56
Before I got the Node-RED stuff from IBM working I tested the normal Tello app again and a new firmware was available. I installed it and later I got the Node-RED stuff working but I constantly got errors.
After a bit of digging and understand what goes where I saw that the Node-RED flows hiccup because the Tello State commands sends a different data string.
Normal Tello is
but now my Tello sends
I checked the PDFs on Ryze Tech but neither the changelog nor the SDK mention those. I checked the Tello EDU SDK and these additional values are for mission pads.
The new firmware is 01.04.78.01 and it looks like Tello is now a Tello EDU.
After a bit of digging and understand what goes where I saw that the Node-RED flows hiccup because the Tello State commands sends a different data string.
Normal Tello is
Code:
pitch:0;roll:-1;yaw:0;vgx:0;vgy:0;vgz:0;templ:68;temph:69;tof:10;h:0;bat:90;baro:-39.22;time:0;agx:-3.00;agy:20.00;agz:-995.00;
Code:
mid:257;x:0;y:0;z:0;mpry:0,0,0;pitch:0;roll:-1;yaw:0;vgx:0;vgy:0;vgz:0;templ:68;temph:69;tof:10;h:0;bat:90;baro:-39.22;time:0;agx:-3.00;agy:20.00;agz:-995.00;
I checked the PDFs on Ryze Tech but neither the changelog nor the SDK mention those. I checked the Tello EDU SDK and these additional values are for mission pads.
The new firmware is 01.04.78.01 and it looks like Tello is now a Tello EDU.