- Joined
- Oct 4, 2019
- Messages
- 4
- Reaction score
- 3
Last year my my Comp Sci teacher and I set up Tello Edu control with UDP packet sending. When I came to visit the school again, when trying to replicate what we had set up, nothing would seem to work. The problem that we are having is that when connected to the Tello Edu device with a UDP packet sender, when sending "command" to 192.168.10.1 we don't get a response. This is the first step in UDP piloting, so we can not even connect it to the access point that we have for drone control. Normally it returns OK or error, but now it is returning neither, it simply does nothing. We have tried resetting the wifi by holding the power button until the light flashes yellow again. Along with this, none of the drones in the fleet of 8 will connect to either the access point or fly from phones anymore. The reason that they disconnected in the first place was because to comply with school rules, we had to reset the access point, but failed to disconnect them first, not thinking that there would be a problem. If anyone else has had this problem, we would be grateful for the help.
--------------------------------------
Gambit Crowley
--------------------------------------
Gambit Crowley