another Tello Pilot (Android App)
- Thread starter bluejune
- Start date
raulvolador
Well-known member
Hi,
Yesterday Rize posted a new Tello Firmware Update 01.04.78.01 as I read here:
New firmware released today!
It seems SDK introduce changes like "Tello State commands sends a different data string" . Maybe this changes affect third party Tello software apps ?
Anyone tested aTelloPilot with new firmware ?
Raul
-----
Yesterday Rize posted a new Tello Firmware Update 01.04.78.01 as I read here:
New firmware released today!
It seems SDK introduce changes like "Tello State commands sends a different data string" . Maybe this changes affect third party Tello software apps ?
Anyone tested aTelloPilot with new firmware ?
Raul
-----
This is related to the SDK. As far as I know aTelloPilot doesn't use the SDK but instead hacked the .
i just upgraded and did a short flight. Looked ok to me
SleepyRobo
Well-known member
- Joined
- Oct 23, 2018
- Messages
- 135
- Reaction score
- 50
@bluejune I won't fluff anything this round. Straight to the point, I am glad for the updates, but is there any improvements that can be made on the WiFi signal? I know physical hardware has it's limitations, but if I could honestly say software is not my issue I could then justify getting range extender.
- Joined
- Apr 8, 2018
- Messages
- 144
- Reaction score
- 190
WiFi signal is not dependent on apps but It's your device (phone) dependent..
You had better get WiFi extender for long range..
Ansia
Well-known member
- Joined
- Oct 14, 2018
- Messages
- 1,008
- Reaction score
- 385
Talk to him right here. The person who wrote in the post above yours is the dev.
- Joined
- Apr 8, 2018
- Messages
- 144
- Reaction score
- 190
i urge there must be a controller ..not like Bluetooth thats sluggish waste of money.Hello,
Here is another request which would be great for me : Add possibility to use RC controller (like flysky FS-i6) plugged on otg.
It is possible, there is a good android drone simulator app called FPV Freerider which allows that using ingenious and simple calibration system ( ).
Is there other pilot here who would have interest for that too ? (hope i am not alone)
please somebody help that how to connect flysky contrller .
Hi, i use flysky controller in an android app called fpvfreerider with special usb adaptator, but the mapping is not correct in aTelloPilot and aTello app. I didn't test yet but i think VRdrone app allows to pilot Tello with Flysky correctly. There is also a new app TelloFPV (New app: TelloFPV) which integrates mapping setting, so i hope it will work...
By the way, I am surprised that RC controller support function is not interesting more people, because these controllers are not a lot more expensive than gamesir (Flysky fs-i6; Jumper T8SG), are better in precision, and have native rate/ratio/trim stick calibration option... Hope it helps
Last edited:
Cool. I wasn't aware that these are compatible with USB controllers, and also didn't know the price tag. I would be interested to see how it compares to the Flypad in terms of precision.
Flypad seems to be much smaller though, and can be had for free: I bought a Parrot Swing + Flypad combo for 20 Euro and sold the Swing after a few days for 23 Euro on Ebay
Hi, yes flypad seems to be great too. The advantage of flysky or jumper is that you can use it with several drones (I don't know for flypad). I became a "tiny whoop" addict and have few ones now. I don't need to have a controller for each one.
- Joined
- Apr 8, 2018
- Messages
- 144
- Reaction score
- 190
One thing to consider is general RC controlller is not centered throttle stick unlike other controllers.
Hovering supported drones are easy to control with centered throttle controllers. (centered when throttle is released.)
BTW, aTelloPilot has a button mapping feature so you can remap them freely.
I can't understand mapping is not correct.
Thank you for your reply. I don't say that the mapping is not correct because of your application, but because of the flysky mapping which is special, not like generic android gamepad.
I learnt in an other thread that android generic gamepad is using X, Y, Z and RZ axis. The flysky (and maybe other RC controler) has the yaw assigned to the RY axis.
So, for use flysky, aTelloPilots would need the possibility to map every stick with every axis, to work with RY axis, to have possibility to invert stick (invert up and down or left and right)...
If i am not wrong, aTelloPilots do nothing of that (it is not a reproach at all, your app is great). For me, the best solution for controller configuration is to ask to the user to move every stick and assign it to the axis the value has changed (Like Fpvfreerider, Picasim, or FPVTello but the RY axis is not yet managed in the current version).
Or have a tab which allows to change axis, something like that :
Yaw = -RY_Axis
Throttle = +X_axis
....
Sorry for my bad english, have a good day.
Last edited:
- Joined
- Apr 8, 2018
- Messages
- 144
- Reaction score
- 190
I had a chance to check a USB dongle with general RC controllers.
It has different axis mapping than other USB controllers.
And that, there are no buttons to be mapped.
I think the big problem with general RC controllers is "not centered throttle stick"
You need to center throttle stick manually if you make it hover (not to ascend or descend)
Thank you ! Yes, i dont know how difficult it would be to control tello without automatic centered throttle stick. But with other drone, i have to find stabilized drone throttle stick position too, i presume it could be a little similar. I would have to center throttle stick when take off and adjust position then.
I fly with a Spektrum DX6e, it has the option to use a centered throttle stick. I also fly a DJI Phantom 2 that has a centered throttle stick. It would be great if I could fly my Tello with one of these.
I'm sorry if this post may have already been answered before but I just want to save time, rather than searching thru 33 pages of posts,
I just paid and downloaded the app on my two cellphones, a sony xperia XA1 plus and a Samsung J7 (2016).
I got the app to work and did some test flights.
What I noticed is that my software (version 0.6 I think) doesnt have the face track feature(???)
I did a screen capture... and compared it to the youtube tutorial of bluejune and also the one on github.
pls. check the image below, and as you can see, there's no face track. as you can see, there is no face track icon here and i cant find any settings to activate.
did i miss some settings? or is my cellphone not compatible?
will appreciate helpful comments pls. pardon if I didnt have much time combing thru the 34 pages of posts.
I'll also give my feedback on the test flights after I do more tests outdoors.
TIA
I just paid and downloaded the app on my two cellphones, a sony xperia XA1 plus and a Samsung J7 (2016).
I got the app to work and did some test flights.
What I noticed is that my software (version 0.6 I think) doesnt have the face track feature(???)
I did a screen capture... and compared it to the youtube tutorial of bluejune and also the one on github.
pls. check the image below, and as you can see, there's no face track. as you can see, there is no face track icon here and i cant find any settings to activate.
did i miss some settings? or is my cellphone not compatible?
will appreciate helpful comments pls. pardon if I didnt have much time combing thru the 34 pages of posts.
I'll also give my feedback on the test flights after I do more tests outdoors.
TIA
Similar threads
