Gamesir T1s with OTG?
- Thread starter Walleye
- Start date
And to think that I did a test range 307 meters away with the T1d Bluetooth and I got a very good video at that distance.
I enclose a link to view and download the video.
2019-06-27 09-59-39.mp4
Attachments
Thank you! it was really exciting to bring the Tello at that distance.
My configuration is:
-Xiaomi wifi Extender 2
-KINGJOY KT-50 metal tripod
-Cellularline Freepower 5200 mAh
-Reflector made of plastic material (DVD case) coated with adhesive aluminum.
Attachments
an old Samsung Note 3 Neo.
always in that place the other day I received many warnings of red lightning and Wifi interference. this is why I ordered the wired T1. not always, but often there is also interference with this type of phone.
always in that place the other day I received many warnings of red lightning and Wifi interference. this is why I ordered the wired T1. not always, but often there is also interference with this type of phone.
I use the Huawei p smart. 2017/18 model. It's excellent all round but yes. It seems to struggle to differentiate between wifi and bt signals. I can fly with a bt controller with no issues. Then I add the repeater and struggles with interference and lag. But you quickly adapt and now I use otg cables. The phone just had a huge android pie upgrade and I haven't tried flying yet but think I will stick to what works.
The new controller with accessories arrived today.
This is now my new Tello control configuration.
View attachment 20190710_152341.jpg
This is now my new Tello control configuration.
View attachment 20190710_152341.jpg
The new controller with accessories arrived today.
This is now my new Tello control configuration.
View attachment 4350
Nice sun shade. Where did you get it? Thanks.
Fly Safe and Have Fun!
Thanks much!Thank you! it was really exciting to bring the Tello at that distance.
My configuration is:
-Xiaomi wifi Extender 2
-KINGJOY KT-50 metal tripod
-Cellularline Freepower 5200 mAh
-Reflector made of plastic material (DVD case) coated with adhesive aluminum.
Today, because of the T1s controller, I risked losing Tello! The first flights are ok, then it is disconnected or went on stand-by and the drone about 60 meters away from me out of control did not respond to T1s commands and continued to run alone. I did not panic and I disconnected the cable from my smartphone and the drone stopped hovering at about 6 meters high on a provincial road that runs along the field. Fortunately, I brought the drone back home driven by the smartphone . Now I'm back with the t1d bluetooth connection and I've never had a similar problem with this, this was my bad luck today!
honestly the improvements with or without Bluetooth were not so obvious,at least for me maybe my smartphone is able to separate bluetooth and wifi signals better than other phones. as said by VolateLo!
honestly the improvements with or without Bluetooth were not so obvious,at least for me maybe my smartphone is able to separate bluetooth and wifi signals better than other phones. as said by VolateLo!
Glad you got your Tello back, sorry for your troubles.
I've read in this forum about the t1s 'going to sleep' mid-flight but never experienced that with mine... probably because I just don't use it much.
I prefer the simplicity of just Tello and a phone with TelloFpv app
Maybe @raulvolador will happen by this thread, he experienced the going to sleep thing and made a thread of it
I wanted to try tello via OTG cable and but the first flights were successful .. (2 batteries) then at the end of the third flight, the problem of out of control!? I have always used the T1D bluetooth for more than 10 hours of flight and I have never had similar problems.
Tello is safe and I am now with the T1d.?
I got a Tello package on Amazon that also included a Gamesir controller. All documentation just says model T1 but this looks like the T1S except there is no dongle in the bottom. I had a hard time getting this to work with an OTG cable and thus the purpose of this post. Here is what I found that works.
1. With the OTG cable disconnected, tur on the Gamesir by holding down the X key and then push the Home (power) button. The last LED on the right under the flip up phone holder should be lit solid and the only one lit.
2. Connect the Gamesir to the phone with the OTG cable.
3. Turn on Tello.
4. Connect to Tello WIFI on your phone.
5. Start TelloFPV app.
6. Select XBOX 360 as your controller.
The only issue I have found so far is R1/R2 plus Y do not work, so I launch and land from the screen. I haven’t tried any other functions on the a Gamesir. Maybe someone has a fix/solution? I’ve been to excited to fly to investigate further.
1. With the OTG cable disconnected, tur on the Gamesir by holding down the X key and then push the Home (power) button. The last LED on the right under the flip up phone holder should be lit solid and the only one lit.
2. Connect the Gamesir to the phone with the OTG cable.
3. Turn on Tello.
4. Connect to Tello WIFI on your phone.
5. Start TelloFPV app.
6. Select XBOX 360 as your controller.
The only issue I have found so far is R1/R2 plus Y do not work, so I launch and land from the screen. I haven’t tried any other functions on the a Gamesir. Maybe someone has a fix/solution? I’ve been to excited to fly to investigate further.
Hi Same problem w/ t1s & s8, & tello fpv using the OTG cable, I can communicate w/ the calibration app- all sticks are good, & w/ left stick on phone home screen. The wifi connects to the phone, but I still can't control tello w/ t1s when connected - control from phone screen is fine, Any other suggestions?
I just noticed: brief message that says new controller found T1s 2.13, but the drone still does not respond to it.
Last edited:
Similar threads
